Details:

一、  Introduction

According to the electrical failures caused by electrical joints, cable joints, moisture, overload, short circuit, excessive contact resistance of battery joints, water immersion, small animals, etc. inside the high and low voltage distribution cabinets, power outages will occur, which will seriously affect the safety of electricity use and production, and bring immeasurable economic losses.

The reasons for electrical components or cables overload, excessive contact resistance, etc. are all due to the heating of conductors, which makes electrical or cable materials produce a large number of electric particles. Since there are relatively many components and joints inside the high and low voltage distribution cabinets, therefore, relying on traditional manual inspection methods cannot timely issue problems, and the failures caused by temperature rise or moisture are very hidden. High-tech acquisition technology must be used with high accuracy and fast response time. Online services can meet the precise monitoring of various electrical distribution systems.

This system uses patented laser particle sensors, which have high accuracy, fast response, and multi-functional monitoring such as monitoring, early warning, analysis and judgment, display, and linkage in the early internal air of the distribution system, which will completely solve the problem of eliminating electrical safety hazards.
1.Innovative advantages
1. Detection: The detector obtains gas particles in the air by sampling. The sampling method can be active, which is to obtain gas particles by blowing air flow into the air, and passive, which is to obtain gas particles through the natural flow of air. The detector is usually equipped with a filter to remove dust and other impurities in the air to ensure the accuracy of detection.
2. Pyrolysis: The pyrolysis device inside the detector heats the collected gas to a high temperature, causing it to undergo a pyrolysis reaction, further decomposing the gas into smaller molecules or atoms. The purpose of thi

二、  Product functions and parameters

● Advanced technology: Optical cloud technology can detect nano-scale pyrolysis particles, abandoning traditional shading rate technology.
●Non-contact: Active air aspiration sampling technology.
●No blind spots: 360-degree full coverage from inside to outside.
●Visualization: Using a 7-inch touch screen, the particle concentration data curve is displayed in real time.
●Support multiple communication methods: RS485, 4G, Lora, Ethernet, optical fiber (optional)
●Extremely early stage: Accurately detect the number of pyrolysis particles and issue warning information very early before smoke and fire appear.
●Anti-interference: 100% accurate and error-free, avoiding the influence of environmental factors such as dust, strong light, airflow, water mist, etc.
●Linkage output: multi-level alarm linkage, which can be linked to sound and light alarms, smart buildings, fire alarm hosts, sprinklers, cameras, etc.
●Open communication protocol output, connection and uploading to third-party platforms
●Alarm output: multiple groups of relay dry contacts
●Remote monitoring: deploy a localized intelligent management system, or connect to a cloud platform for synchronous remote management. Real-time data can be synchronized to the mobile phone APP.
● Installed in large indoor spaces

三、   Installation site of aspirating detector

四、System scheme diagram